▸Machining Workshop

  1. Product produce equipment
  2. ▸Machining Workshop

Pneumatic stamping machine (110 ton)

The compressed air generated by the compressor is sent to the solenoid valve through the pipeline, and the action of the solenoid valve is controlled by the foot switch to control the working and return of the air cylinder, thus achieving the purpose of punching. The compressed air can be stored in the air tank and can be retrieved at any time, so the motor has no idle energy waste. The use of air cylinder as the working part and electromagnetic valve as the control element makes the structure of the machine simpler, with low failure rate, high safety, easy maintenance, lower maintenance cost and high production efficiency. 4 series pool lights and 5 series pool flood lights are pneumatically pressed and formed by the pneumatic press.

Back